16 SEER Systems Archives | FL Cooling Store

Goodman 3.0 Ton 16 SEER GSZ160361B+AVPTC37C14A

Florida Cooling Store — Sat, 06 Nov 2021 15:35:14 +0000

Goodman GSZ160361B* + AVPTC37C14A*
3.0 Ton 16 SEER Heat Pump R410A Environmentally Friendly Refrigerant
Condenser:
GSZ160361B*
Air Handler:
AVPTC37C14A*
Aux Heat:
HXC
Warranty of:
10 Years Parts and Compressor
1 Year Labor from Florida Cooling Store

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Goodman 3.0 Ton 16 SEER GSZ160361B+AVPTC37C14A appeared first on FL Cooling Store.

Goodman 3.0 Ton 16 SEER Heat Pump Split System GSZ160361B+AVPTC37C14A

Florida Cooling Store — Mon, 26 Jul 2021 20:15:51 +0000

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Goodman 3.0 Ton 16 SEER Heat Pump Split System GSZ160361B*+AVPTC37C14A* appeared first on FL Cooling Store.

Goodman 2.0 Ton 15 SEER Heat Pump Split System GSZ160241B+AVPTC25B14A*

Florida Cooling Store — Mon, 26 Jul 2021 17:57:13 +0000

Goodman GSZ160241B+AVPTC25B14A* 2.0 Ton 16 SEER Heat Pump R410A Environmentally Friendly Refrigerant
Condenser:
GSZ160241B
Air Handler:
AVPTC25B14A*
Aux Heat:
Warranty of:
10 Years Parts and Compressor with registration online
1 Year Labor from Florida Cooling Store

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Goodman 2.0 Ton 15 SEER Heat Pump Split System GSZ160241B+AVPTC25B14A* appeared first on FL Cooling Store.

Goodman 2.0 Ton 16 SEER Heat Pump Split System GSZ160241B+AVPTC29B14A*

Florida Cooling Store — Mon, 26 Jul 2021 17:48:46 +0000

Goodman GSZ160241B+AVPTC29B14A* 2.0 Ton 16 SEER Heat Pump R410A Environmentally Friendly Refrigerant
Condenser:
GSZ160241B
Air Handler:
AVPTC29B14A*
Aux Heat:
Warranty of:
10 Years Parts and Compressor with registration online
1 Year Labor from Florida Cooling Store

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Goodman 2.0 Ton 16 SEER Heat Pump Split System GSZ160241B+AVPTC29B14A* appeared first on FL Cooling Store.

Goodman 3.0 Ton 14 SEER Heat Pump Split System GSZ160361B* + AWUF370516B*

Florida Cooling Store — Tue, 08 Dec 2020 18:57:56 +0000

Goodman GSZ160361B* + AWUF370516B*
3.0 Ton 14 SEER Heat Pump R410A Environmentally Friendly Refrigerant
Condenser:
GSZ160361B*
Air Handler:
AWUF370516B*
Aux Heat:
HXC
Warranty of:
10 Years Parts and Compressor
1 Year Labor from Florida Cooling Store

Specification Sheets & Brochures:

Manufacturers Specification Sheets:

Condenser: GSZ16 Condenser Specifications

Air Handler: ASPT Air Handler Specifications

Product Brochure: GSZ16 Condenser Product Brochure

Product Brochure: ASPT Air Handler Product Brochure

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Goodman 3.0 Ton 14 SEER Heat Pump Split System GSZ160361B* + AWUF370516B* appeared first on FL Cooling Store.

Goodman 3.0 Ton 18 SEER GSZC180361C* + AVPTC37C14A*

Florida Cooling Store — Tue, 08 Dec 2020 15:27:29 +0000

Goodman GSZC180361C* + AVPTC37C14A* 3.0 Ton 18 SEER two-stage heat pump R410A Environmentally Friendly Refrigerant
Condenser:
GSZC180361C*
Variable Speed Communicating Air Handler:
AVPTC37C14A*
Aux Heat:
HKS*
Warranty of:

Lifetime Limited Compressor Warranty*

10 Year Unit Replacement Limited Warranty*

10 Years Parts*

1 Year Labor from Florida Cooling Store

* To receive the 10-Year Unit Replacement Limited Warranty, Lifetime Compressor Limited Warranty (good for as long as you own your home) and 10-Year Parts Limited Warranty online registration must be completed within 60 days of installation.

Specification Sheets & Brochures:

Manufacturers Specification Sheets:

Condenser: GSZC16 Condenser Specifications

Air Handler: AVPT Air Handler Specifications

Product Brochure: GSZC16 Condenser Product Brochure

Product Brochure: AVPT Air Handler Product Brochure

2 Stage Communicating Heat Pump Condenser Features:

High-efficiency two-stage scroll compressor
High-efficiency two-speed ECM condenser fan motor
ComfortNet Communications System compatible
Factory-installed filter drier
Factory-installed suction line accumulator
Factory-installed compressor crankcase heater
Factory-installed high-capacity muffler
Factory-installed high and low-pressure switches
High-density foam compressor sound blanket
Factory-installed sensors monitoring coil and ambient temperature
Copeland® ComfortAlert built-in diagnostics
SmartShift® technology with short-cycle protection to ensure quiet, reliable defrost
In communicating mode, only two low voltage wires to the outdoor unit are required
Contactor with lug connection
Customized control algorithms
Fully charged for fifteen feet of tubing length
AHRI Certified-ETL Listed
Color-coded terminal strip for non-communicating set-up
Copper tube & enhanced aluminum fin coil.

Variable Speed Air Handler Features:

Internal factory-installed thermal expansion valves for cooling and heat pump applications
Variable-speed ECM blower motor
Integrated communicating ComfortBridge Technology
Commissioning and diagnostics via onboard Bluetooth with the CoolCloud phone and tablet application.
Auto-configuration of the airflow and tonnage in communicating mode
Provides constant CFM over a wide range of static pressure conditions independent of the duct system
CFM indicator
Fault recall of six most recent faults
Provides adjustable low CFM for efficient fan-only operation
Improved humidity and comfort control
Built-in compatibility with multi-stage heat pump and cooling applications

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Goodman 3.0 Ton 18 SEER GSZC180361C* + AVPTC37C14A* appeared first on FL Cooling Store.

Trane 3.5 Ton 17 SEER 4TWR6042H1000* – TEM8A0C48V41D*

Florida Cooling Store — Wed, 12 Aug 2020 18:42:11 +0000

Trane 4TWR6042H1000* – TEM8A0C48V41D*
3.5 Ton 17 SEER Heat Pump R410A refrigerant.
Condenser:
4TWR6042H1000*
Air Handler:
TEM8A0C48V41D*

AHRI: 10153771

HSPF: 9.6
Heat Kit
Warranty:
10 Year Parts with registration online by customer.
1 Year Labor from Florida Cooling Store

Specification Sheets & Brochures:

Manufacturers Specification Sheets:

Condenser: 4TWR6 Condenser Specifications

Air Handler: TEM6 Air Handler Specifications

Product Brochures: Trane Heat Pump Brochure

Product Brochures: Trane Air Handler Brochure

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Trane 3.5 Ton 17 SEER 4TWR6042H1000* – TEM8A0C48V41D* appeared first on FL Cooling Store.

Trane 4.0 Ton 16.75 SEER 4TWR6048H1000* – TEM8A0C48V41D*

Florida Cooling Store — Wed, 12 Aug 2020 18:39:20 +0000

Trane 4TWR6048H1000* – TEM8A0C48V41D*
4.0 Ton 16.75 SEER Heat Pump R410A refrigerant.
Condenser:
4TWR6048H1000*
Air Handler:
TEM8A0C48V41D*

AHRI: 10153779

HSPF: 9.0
Heat Kit
Warranty:
10 Year Parts with registration online by customer.
1 Year Labor from Florida Cooling Store

Specification Sheets & Brochures:

Manufacturers Specification Sheets:

Condenser: 4TWR6 Condenser Specifications

Air Handler: TEM6 Air Handler Specifications

Product Brochures: Trane Heat Pump Brochure

Product Brochures: Trane Air Handler Brochure

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Trane 4.0 Ton 16.75 SEER 4TWR6048H1000* – TEM8A0C48V41D* appeared first on FL Cooling Store.

Trane 5.0 Ton 16 SEER 4TWR6060H1000* – TEM8A0C60V51D*

Florida Cooling Store — Wed, 12 Aug 2020 18:36:05 +0000

Trane 4TWR6060H1000* – TEM8A0C60V51D*
5.0 Ton 15.25 SEER Heat Pump R410A refrigerant.
Condenser:
4TWR6060H1000*
Air Handler:
TEM8A0C60V51D*

AHRI: 10153784

HSPF: 9.25
Heat Kit:
BAYHTR1510LUG
Warranty:
10 Year Parts with registration online by customer.
1 Year Labor from Florida Cooling Store

Specification Sheets & Brochures:

Manufacturers Specification Sheets:

Condenser: 4TWR6 Condenser Specifications

Air Handler: TEM6 Air Handler Specifications

Product Brochures: Trane Heat Pump Brochure

Product Brochures: Trane Air Handler Brochure

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Trane 5.0 Ton 16 SEER 4TWR6060H1000* – TEM8A0C60V51D* appeared first on FL Cooling Store.

Trane 5.0 Ton 16 SEER 4TWR6060H1000* – TEM6A0C60H51S*

Florida Cooling Store — Wed, 12 Aug 2020 18:33:05 +0000

Trane 4TWR6060H1000* – TEM6A0C60H51S*
5.0 Ton 14.75 SEER Heat Pump R410A refrigerant.
Condenser:
4TWR6060H1000*
Air Handler:
TEM6A0C60H51S*

AHRI: 8858391

HSPF: 9.0
Heat Kit:
BAYHTR1510LUG
Warranty:
10 Year Parts with registration online by customer.
1 Year Labor from Florida Cooling Store

Specification Sheets & Brochures:

Manufacturers Specification Sheets:

Condenser: 4TWR6 Condenser Specifications

Air Handler: TEM6 Air Handler Specifications

Product Brochures: Trane Heat Pump Brochure

Product Brochures: Trane Air Handler Brochure

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Trane 5.0 Ton 16 SEER 4TWR6060H1000* – TEM6A0C60H51S* appeared first on FL Cooling Store.