2.0 Ton Archives | FL Cooling Store

GrandAire 2.0 Ton 14 SEER WCH4244GKP/WAHL244C

Florida Cooling Store — Wed, 27 Oct 2021 11:22:47 +0000

GrandAire 2.0 Ton 14 SEER WCH4244GKP/WAHL244C
2.0 Ton 14 SEER Heat Pump R410A Environmentally Friendly Refrigerant
Condenser:
WCH4244GKP
Air Handler:
WAHL244C
Aux Heat:

EHK05AKN – 5 KW Electric Heater No Circuit Breaker

Warranty of:
10 Years Parts and Compressor With Registration Online By Customer
1 Year Labor from Florida Cooling Store

Specification Sheets & Brochures:

Manufacturers Specification Sheets:

Condenser: GrandAire Condenser Specifications

Air Handler: GrandAire Air Handler Specifications

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post GrandAire 2.0 Ton 14 SEER WCH4244GKP/WAHL244C appeared first on FL Cooling Store.

Goodman 2.0 Ton 15 SEER Heat Pump Split System GSZ160241B+AVPTC25B14A*

Florida Cooling Store — Mon, 26 Jul 2021 17:57:13 +0000

Goodman GSZ160241B+AVPTC25B14A* 2.0 Ton 16 SEER Heat Pump R410A Environmentally Friendly Refrigerant
Condenser:
GSZ160241B
Air Handler:
AVPTC25B14A*
Aux Heat:
Warranty of:
10 Years Parts and Compressor with registration online
1 Year Labor from Florida Cooling Store

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Goodman 2.0 Ton 15 SEER Heat Pump Split System GSZ160241B+AVPTC25B14A* appeared first on FL Cooling Store.

Goodman 2.0 Ton 16 SEER Heat Pump Split System GSZ160241B+AVPTC29B14A*

Florida Cooling Store — Mon, 26 Jul 2021 17:48:46 +0000

Goodman GSZ160241B+AVPTC29B14A* 2.0 Ton 16 SEER Heat Pump R410A Environmentally Friendly Refrigerant
Condenser:
GSZ160241B
Air Handler:
AVPTC29B14A*
Aux Heat:
Warranty of:
10 Years Parts and Compressor with registration online
1 Year Labor from Florida Cooling Store

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Goodman 2.0 Ton 16 SEER Heat Pump Split System GSZ160241B+AVPTC29B14A* appeared first on FL Cooling Store.

Trane 2.0 Ton 15 SEER 4TWR5024H1000* – TEM8A0B24V21D*

Florida Cooling Store — Thu, 13 Aug 2020 18:44:00 +0000

Trane 4TWR5024H1000* – TEM8A0B24V21D*
2.0 Ton 15 SEER Heat Pump R410A refrigerant with Variable Speed Air Handler
Condenser:
4TWR5024H1000*
Variable Speed Air Handler:
TEM8A0B24V21D*

AHRI: 10298673

HSPF: 9.0
Heat Kit
Warranty:
10 Year Parts with registration online by customer.
1 Year Labor from Florida Cooling Store

Specification Sheets & Brochures:

Manufacturers Specification Sheets:

Condenser: 4TWR5 Condenser Specifications

Air Handler: TEM6 Air Handler Specifications

Product Brochures: Trane Heat Pump Brochure

Product Brochures: Trane Air Handler Brochure

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane C

The post Trane 2.0 Ton 15 SEER 4TWR5024H1000* – TEM8A0B24V21D* appeared first on FL Cooling Store.

Trane 2.0 Ton 16 SEER 4TWR6024H1000* – TEM8A0B30V31D*

Florida Cooling Store — Wed, 12 Aug 2020 18:19:32 +0000

Trane 4TWR6024H1000* – TEM8A0B30V31D*
2.0 Ton 16.25 SEER Heat Pump R410A refrigerant.
Condenser:
4TWR6024H1000*
Air Handler:
TEM8A0B30V31D*

AHRI: 10153749

HSPF: 9.0
Heat Kit
Warranty:
10 Year Parts with registration online by customer.
1 Year Labor from Florida Cooling Store

Specification Sheets & Brochures:

Manufacturers Specification Sheets:

Condenser: 4TWR6 Condenser Specifications

Air Handler: TEM6 Air Handler Specifications

Product Brochures: Trane Heat Pump Brochure

Product Brochures: Trane Air Handler Brochure

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Trane 2.0 Ton 16 SEER 4TWR6024H1000* – TEM8A0B30V31D* appeared first on FL Cooling Store.

RunTru by TRANE 2.5 Ton 14 SEER A4HP4030A1000A – A4AH4P36A1B30A

Florida Cooling Store — Wed, 12 Aug 2020 17:57:14 +0000

RunTru by TRANE A4HP4030A1000A – A4AH4P36A1B30A
2.0 Ton 14 SEER
Heat Pump R410A refrigerant.
Condenser:
A4HP4030A1000A
Air Handler:
A4AH4P36A1B30A

AHRI: 204599895

HSPF: 8.5

Aux Heat:
HXC
Warranty:
10-Year Compressor & Coil (Indoor & Outdoor) No registration needed
5-Year Functional Parts
1-Year Labor from Florida Cooling Store

Specification Sheets & Brochures:

Manufacturers Specification Sheets:

Condenser:

Air Handler:

Product Brochures:

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
		X

The post RunTru by TRANE 2.5 Ton 14 SEER A4HP4030A1000A – A4AH4P36A1B30A appeared first on FL Cooling Store.

Trane 2.0 Ton 14 SEER 4TWR4024G1000* – TEM6A0B24H21S*

Florida Cooling Store — Wed, 12 Aug 2020 13:09:51 +0000

Trane 4TWR4024G1000* – TEM6A0B24H21S*
2.0 Ton XR14 Series 14 SEER Heat Pump
with Trane Air Handler R410A refrigerant.
Condenser:
4TWR4024G1000*
Air Handler:
TEM6A0B24H21S*

AHRI: 8938849

HSPF: 8.5
Heat Kit
Warranty:
10 Year Parts with registration online by customer.
1 Year Labor from Florida Cooling Store

——————————————

Specification Sheets & Brochures:

Manufacturers Specification Sheets:

Condenser: 4TWR4 Condenser Specifications

Air Handler: TEM4 Air Handler Specifications

Product Brochures: Trane Heat Pump Brochure

Product Brochures: Trane Air Handler Brochure

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Trane 2.0 Ton 14 SEER 4TWR4024G1000* – TEM6A0B24H21S* appeared first on FL Cooling Store.

Goodman 2.0 Ton 15 SEER GSZ140241K/ASPT33C14A

Florida Cooling Store — Fri, 12 Jun 2020 17:11:05 +0000

Goodman GSZ140241K + ASPT33C14A*
2.0 Ton 15 SEER Heat Pump R410A Environmentally Friendly Refrigerant
Condenser:
GSZ140241K*
Air Handler:
ASPT33C14A*
Aux Heat:
HXC
Warranty of:
10 Years Parts and Compressor
1 Year Labor from Florida Cooling Store

Specification Sheets & Brochures:

Manufacturers Specification Sheets:

Condenser: GSZ14 Condenser Specifications

Air Handler: ASPT Air Handler Specifications

Product Brochure: GSZ14 Condenser Brochure

Product Brochure: ASPT Air Handler Brochure

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Goodman 2.0 Ton 15 SEER GSZ140241K*/ASPT33C14A* appeared first on FL Cooling Store.

Trane 2.0 Ton 15 SEER 4TWR5024H1000* – TEM6A0B24H21S*

Florida Cooling Store — Wed, 03 Jun 2020 18:34:30 +0000

Trane 4TWR5024H1000* – TEM6A0B24H21S*
2.0 Ton 15 SEER Heat Pump R410A refrigerant with Variable Speed Air Handler
Condenser:
4TWR5024H1000*
Variable Speed Air Handler:
TEM6A0B24H21S*

AHRI: 9922058

HSPF: 9.5
Heat Kit
Warranty:
10 Year Parts with registration online by customer.
1 Year Labor from Florida Cooling Store

Specification Sheets & Brochures:

Manufacturers Specification Sheets:

Condenser: 4TWR5 Condenser Specifications

Air Handler: TEM6 Air Handler Specifications

Product Brochures: Trane Heat Pump Brochure

Product Brochures: Trane Air Handler Brochure

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
*Warranty Registration	We will make sure you get your new system registered for your 10 year parts warranty!	X

The post Trane 2.0 Ton 15 SEER 4TWR5024H1000* – TEM6A0B24H21S* appeared first on FL Cooling Store.

RunTru by TRANE 2.0 Ton 14 SEER A4HP4023A1000A – A4AH4P24A1B60A

Florida Cooling Store — Thu, 28 May 2020 18:18:20 +0000

RunTru by TRANE A4HP4023A1000A – A4AH4P24A1B60A
2.0 Ton 14 SEER
Heat Pump R410A refrigerant.
Condenser:
A4HP4023A1000A
Air Handler:
A4AH4P24A1B60A

Aux Heat:
HXC
Warranty:
10-Year Compressor & Coil (Indoor & Outdoor) No registration needed
5-Year Functional Parts
1-Year Labor from Florida Cooling Store

Specification Sheets & Brochures:

Manufacturers Specification Sheets:

Condenser:

Air Handler:

Product Brochures:

What’s Included Section:

Florida Cooling Store Inc:

Installation Features:

Name of the feature	Example	Default
* The crew shows up on time.	In the time slot of the day of your choice from our install calendar.	X
* Condenser installed at correct manufacturers clearance.	The Condenser needs air to operate.	x
* Old refrigerant flushed using RX11 line flush.	We have to prepare your copper lines for the new environmentally friendly R410A Refrigerant.	x
* Line drier either installed on site, or factory pre-installed.	This is like an oil filter for your system.	X
* All welds electronically checked.	We don’t want any pesky leaks!	x
* Balanced charge, complete startup.	You want the right amount, down to the ounce, to be perfectly comfortable.	X
* Vacuum pulled to 500 microns.	We use electronic micrometers. Kinda fancy.	x
* Plenums mechanically fastened and sealed to air handler.	The Plenum is basically the outlet, and the inlet for your air flow. Pretty important.	x
* Automatic overflow shutoff switch on airhandler.	I bet you know what a leaking air handler will do to your floor or ceiling.	X
* Old equipment hauled away and recycled.	No big pile of trash out by the road!	X
* Job site cleaned up, all debris hauled back to warehouse.	We have been told that its cleaner after we leave. (We not maids, but we respect your home!)	X
* New Air Handler Base, or rebuild existing built in base.	Either way, its up to code, and done to best practices for your existing installation.	X
* New Cladlight Hurricane Condenser Pad, or level existing base.	This is required, and we do not use a plastic pad, no way!	x
*Start up and test system	We will show you how to use your new system.	x
		X

The post RunTru by TRANE 2.0 Ton 14 SEER A4HP4023A1000A – A4AH4P24A1B60A appeared first on FL Cooling Store.